TP-Link JetStream T3700G-52TQ - Show Ip Mfc; Show Ip Pim Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
source ip-addr —— Displays the multicast routing table with specified source
IP address.
detail —— Displays the detailed multicast routing table.
static [ source
source-ip ] —— Displays all the static multicast routing entries
or the static multicast routing entries with specified source IP address.
summary —— Displays the summary information of the multicast routing
table.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all IP multicast routing entries:
T3700G-52TQ(config)# show ip mroute
42.14 show ip mfc
Description
The show ip mfc command is used to display the information of the multicast
forwarding table.
Syntax
show ip mfc
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display ip multicast forwarding table information:
T3700G-52TQ(config)# show ip mfc
42.15 show ip pim interface
Description
The show ip pim interface command is used to display the specified PIM
interface information. Using the show ip pim interface command without
parameters displays the detailed information of all the PIM interfaces.
374