TP-Link JetStream T3700G-52TQ - Spanning-Tree Bpduflood

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
itself automatically as ERROR-PORT when it receives BPDU packets, and the
port will disable the forwarding function for a while. To disable the BPDU
protect function, please use no spanning-tree bpduguard command.
Syntax
spanning-tree bpduguard
no spanning-tree bpduguard
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface
port-channel)
Example
Enable the BPDU protect function for Gigabit Ethernet port 1/0/2:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#spanning-tree bpduguard
30.17 spanning-tree bpduflood
Description
The spanning-tree bpduflood command is used to enable the BPDU flood
function for a port, it takes effect only when spanning tree function is globally
disabled. With the function enabled, the port can forward BPDU packets to
other BPDU-flood-enabled ports. To disable the BPDU flood function, please
use no spanning-tree bpduflood command.
Syntax
spanning-tree bpduflood
no spanning-tree bpduflood
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet/interface port-channel/interface range port-channel)
Example
Enable the BPDU flood function for Gigabit Ethernet port 1/0/2:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#spanning-tree bpduflood
243