TP-Link JetStream T3700G-52TQ - Chapter 17 IEEE 802.1 X Commands; Dot1 X System-Auth-Control; Dot1 X Timeout Quiet-Period

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 17 IEEE 802.1X Commands
IEEE 802.1X function is to provide an access control for LAN ports via the authentication. Only
the supplicant passing the authentication can access the LAN.
17.1 dot1x system-auth-control
Description
The dot1x system-auth-control command is used to enable the IEEE 802.1X
function globally. To disable the IEEE 802.1X function, please use no dot1x
system-auth-control command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Command Mode
Global Configuration Mode
Example
Enable the IEEE 802.1X function:
T3700G-52TQ(config)#dot1x system-auth-control
17.2 dot1x timeout quiet-period
Description
The dot1x timeout quiet-period command is used to enable the quiet-period
function. To disable the function, please use no dot1x timeout quiet-period
command.
Syntax
dot1x timeout quiet-period time
no dot1x timeout quiet-period
96