TP-Link JetStream T3700G-52TQ - Spanning-Tree Hold-Count; Spanning-Tree Max-Hops

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Configure forward-time max-age for Spanning Tree as 16 seconds and 22
seconds respectively:
T3700G-52TQ(config)#spanning-tree timer forward-time 16 max-age 22
30.13 spanning-tree hold-count
Description
The spanning-tree hold-count command is used to configure the maximum
number of BPDU packets transmitted per Hello Time interval. To return to the
default configurations, please use no spanning-tree hold-count command.
Syntax
spanning-tree hold-count value
no spanning-tree hold-count
Parameter
value —— The maximum number of BPDU packets transmitted per Hello Time
interval, ranging from 1 to 20 in pps. By default, it is 5.
Command Mode
Global Configuration Mode
Example
Configure the hold-count of STP as 8pps:
T3700G-52TQ(config)#spanning-tree hold-count 8
30.14 spanning-tree max-hops
Description
The spanning-tree max-hops command is used to configure the maximum
number of hops that occur in a specific region before the BPDU is discarded.
To return to the default configurations, please use no spanning-tree
max-hops command.
Syntax
spanning-tree max-hops value
no spanning-tree max-hops
241