TP-Link JetStream T3700G-52TQ - Management-Port Ipv6 Address Dhcp; Management-Port Ipv6 Address Autoconfig

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
ipv6-addr —— Specify the ipv6 gateway address of the management port.
Command Mode
Global Configuration Mode
Example
Specify the ip address of the management port as 192.168.10.1,and the
subnet mask as 255.255.255.0:
T3700G-52TQ(config)# management-port ip 192.168.10.1 255.255.255.0
51.8 management-port ipv6 address dhcp
Description
The management-port ipv6 address dhcp command is used to enable the
DHCPv6 Client function. When this function is enabled, the management port
will try to obtain IP from DHCPv6 server. To delete the allocated IP from
DHCPv6 server and disable the DHCPv6 Client function, please use no
management-port ipv6 address dhcp command.
Syntax
management-port ipv6 address dhcp
no management-port ipv6 address dhcp
Configuration Mode
Global Configuration Mode
Example
Enable the DHCPv6 Client function on the management port:
T3700G-52TQ(config)# management-port ipv6 address dhcp
51.9 management-port ipv6 address autoconfig
Description
This management-port ipv6 address autoconfig command is used to
enable the automatic configuration of the ipv6 global address on the
management port. To disable the automatic configuration of the ipv6 global
463