TP-Link JetStream T3700G-52TQ - Match Secondary Vlan; Policy-Map

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
25.23 match secondary vlan
Description
The match secondary vlan command definites a match condition based on
the secondary VLAN ID. The match condition only apply to an IPv4 class.
Syntax
match secondary vlan vlan-id
Parameter
vlan-id —— The secondary VLAN ID, ranging from 1 to 4093.
Command Mode
Class-Map Configuration Mode( IPv4)
Example
Create an IPv4 class whose name is “Market”, definites a match condition that
the secondary VLAN ID should be 3:
T3700G-52TQ(config)#class-map match-all Market ipv4
T3700G-52TQ(config-cmap)#match secondary vlan 3
25.24 policy-map
Description
The policy-map command is used to enter the Policy-Map Config mode for
an existing DiffServ policy.
Syntax
policy-map policy-map-name
Parameter
policy-map-name —— The name of an existing DiffServ policy.
Command Mode
Global Configuration Mode
Example
Enter the Policy-Map Config mode for a policy named tp:
T3700G-52TQ(config)#policy-map tp
196