JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
port
—— The Fast/Gigabit/Ten-Gigabit Ethernet port number.
seconds
—— The interval to take samplings from the port, ranging from 10 to
3600 in seconds. By default, it is 1800.
owner-name
—— The owner of the history sample entry, ranging from 1 to 16
characters.
buckets-number
——The maximum number of buckets desired for the RMON
history group of statistics, ranging from 1 to 65535. The default is 50 buckets.
Command Mode
Global Configuration Mode
Example
Configure the sample port as 1/0/2 and the sample interval as 100 seconds
for the entry 1:
T3700G-52TQ(config)#rmon history 1 interface gigabitEthernet 1/0/2
interval 100 owner owner1
35.16 rmon event
Description
The rmon event command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use no rmon event
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
Syntax
rmon event
index
{ [ community
community-name
] [ description
descript
]
[ type {none | log | notify | log-notify } ] [owner
owner-name
] }
no rmon event
index
Parameter
index
—— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
community-name
—— The name of the user or community to which the event
belongs, ranging from 1 to 16 characters.
descript
—— The description of the event, ranging from 1 to 16 characters.
By default, it is empty.
type
—— The event type, with “none”, “log”, “notify” and “log-notify” options.
“None” indicates no processing, “log” indicates logging the event, “notify”
303
To Next Page
Loading...
