JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 20 HTTP and HTTPS Commands
With the help of HTTP (HyperText Transfer Protocol) or HTTPS (Hyper Text Transfer Protocol
over Secure Socket Layer), you can manage the switch through a standard browser.
HTTP is the protocol to exchange or transfer hypertext.
SSL (Secure Sockets Layer), a security protocol, is to provide a secure connection for the
application layer protocol (e.g. HTTP) based on TCP. Adopting asymmetrical encryption
technology, SSL uses key pair to encrypt/decrypt information. A key pair refers to a public key
(contained in the certificate) and its corresponding private key. By default the switch has a
certificate (self-signed certificate) and a corresponding private key. The Certificate/Key
Download function enables the user to replace the default key pair.
20.1 ip http server
Description
The ip http server command is used to enable the HTTP server within the
switch. To disable the HTTP function, please use no ip http server command.
This function is enabled by default. The HTTP and HTTPS server function
cannot be disabled at the same time.
Syntax
ip http server
no ip http server
Command Mode
Global Configuration Mode
Example
Disable the HTTP function:
T3700G-52TQ(config)# no ip http server
120
To Next Page
Loading...
