TP-Link JetStream T3700G-52TQ - Show Ip Igmp Interface; Show Ip Igmp Interface Vlan

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the dynamic multicast groups on interface VLAN 1:
T3700G-52TQ(config)# show ip igmp groups interface vlan 1
41.22 show ip igmp interface
Description
The show ip igmp interface command is used to display the IGMP
configuration information on the specified port.
Syntax
show ip igmp interface { fastEthernet | gigabitEthernet |
ten-gigabitEthernet }
port [stats ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— Specify the port
type.
port
—— Specify the port number.
stats —— The IGMP packet statistics received on the specified port.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistics of the IGMP packets received on the gigabitEthernet
1/0/1:
T3700G-52TQ(config)# show ip igmp interface gigabitEthernet 1/0/1 stats
41.23 show ip igmp interface vlan
Description
The show ip igmp interface vlan command is used to display the IGMP
configuration information on the specified interface VLAN.
364