TP-Link JetStream T3700G-52TQ - Show Running-Config; Show Startup-Config

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
22.34 show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or of a specified port.
Syntax
show running-config [ unitid ]
Parameter
unitid —— Specify the unit in the stack to display its operating configuration.
If not specified, all the members’ operating configurations will be displayed in
the stack.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all the members’ current operating configuration in the stack:
T3700G-52TQ#show running-config
22.35 show startup-config
Description
The show startup-config command is used to display the current
configuration saved in the switch. These configuration settings will not be lost
the next time you reboot the switch.
Syntax
show startup-config
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the saved configuration:
T3700G-52TQ# show startup-config
159