TP-Link JetStream T3700G-52TQ - Chapter 41 IGMP Commands; Ip Igmp(Global); Ip Igmp(Interface)

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 41 IGMP Commands
Internet Group Management Protocol (IGMP) is used between hosts on a LAN and the routers
on this LAN to track the multicast groups of which hosts are multicast members.
41.1 ip igmp(global)
Description
The ip igmp command is used to enable IGMP function globally. To disable
IGMP function globally, please use no ip igmp command.
Syntax
ip igmp
no ip igmp
Command Mode
Interface Configuration Mode
Example
Enable the IGMP function globally:
T3700G-52TQ(config)#ip igmp
41.2 ip igmp(interface)
Description
The ip igmp command is used to enable IGMP function on the specified
interface. To disable IGMP function on this interface, please use no ip igmp
command.
Syntax
ip igmp
no ip igmp
Command Mode
Interface Configuration Mode
352