TP-Link JetStream T3700G-52TQ - Chapter 19 SSH Commands; Ip Ssh Server; Ip Ssh Version

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 19 SSH Commands
SSH (Security Shell) can provide the unsecured remote management with security and
powerful authentication to ensure the security of the management information.
19.1 ip ssh server
Description
The ip ssh server command is used to enable SSH function. To disable the
SSH function, please use no ip ssh server command.
Syntax
ip ssh server
no ip ssh server
Command Mode
Global Configuration Mode
Example
Enable the SSH function:
T3700G-52TQ(config)# ip ssh server
19.2 ip ssh version
Description
The ip ssh version command is used to enable the SSH protocol version. To
disable the protocol version, please use no ip ssh version command.
Syntax
ip ssh version { v1 | v2 }
no ip ssh version { v1 | v2 }
Parameter
v1 | v2 —— The SSH protocol version to be enabled. They represent SSH v1
and SSH v2 respectively.
115