TP-Link JetStream T3700G-52TQ - Ip Igmp Query-Max-Response-Time; Ip Igmp Robustness

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Configure the interval of General Query Messages that the switch sends as
50 seconds on interface VLAN 2:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip igmp query-interval 50
41.8 ip igmp query-max-response-time
Description
The ip igmp query-max-response-time command is used to specify the max
response time to the General Query message on specified interface. To
restore to the default value on this interface, please use no igmp
query-max-response-time command.
Syntax
ip igmp query-max-response-time time
no ip igmp query-max-response-time
Parameter
time —— Specify the max response time to the General Query message,
ranging from 0 to 255. The default value is 100 (10 seconds)
Command Mode
Interface Configuration Mode
Example
Configure the max response time to the General Query message as 5
seconds on Interface VLAN 2:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip igmp query-max-response-time 50
41.9 ip igmp robustness
Description
The ip igmp robustness used to configure the existing time of the
non-querier on specified interface. To restore to the default value on this
interface, please use no ip igmp robustness command.
356