JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
User Guidelines
The RADIUS servers you configured are added in the server group “radius” by
default.
Example
Configure a RADIUS server with the IP address as 1.1.1.1, authentication port
as 1200, timeout as 6 seconds, retransmit times as 3, and the unencrypted
key string as 12345.
T3700G-52TQ(config)# radius-server host 1.1.1.1 auth-port 1200 timeout
6 retransmit 3 key 12345
48.4 show radius-server
Description
This show radius-server command is used to display the summary
information of the RADIUS servers.
Syntax
show radius-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the RADIUS servers:
T3700G-52TQ(config)# show radius-server
48.5 aaa authentication login
Description
This aaa authentication login command is used to configure a login
authentication method list. A method list describes the authentication
methods and their sequence to authenticate a user. To delete the specified
436
To Next Page
Loading...
