TP-Link JetStream T3700G-52TQ - Line Console; Login Authentication(Console)

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the default 802.1X accounting method list:
T3700G-52TQ(config)# show aaa accounting
48.11 line console
Description
The line console command is used to enter the Line Configuration Mode
configure the console port to which you want to apply the authentication list.
Syntax
line console { linenum }
Parameter
linenum —— The number of users allowed to login through console port. Its
value is 0 in general, for the reason that console input is only active on one
console port at a time.
Command Mode
Global Configuration Mode
Example
Enter the Console port configuration mode and configure the console port 0:
T3700G-52TQ(config)#line console 0
48.12 login authentication(console)
Description
The login authentication command is used to apply the login authentication
method list to the console port.
Syntax
login authentication { method-list }
no login authentication
441