TP-Link JetStream T3700G-52TQ - Voice Vlan Priority; Voice Vlan Oui

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface ten-gigabitEthernet / interface range
ten-gigabitEthernet)
Example
Enable the Voice VLAN mode for the Gigabit Ethernet port 1/0/3:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/3
T3700G-52TQ(config-if)#voice vlan
8.3 voice vlan priority
Description
The voice vlan priority command is used to configure the priority for the
Voice VLAN. To restore to the default priority, please use no voice vlan
priority command. By default, the priority value is 6.
Syntax
voice vlan priority pri
no voice vlan priority
Parameter
pri —— Priority, ranging from 0 to 7.
Command Mode
Global Configuration Mode
Example
Configure the priority of the Voice VLAN as 5:
T3700G-52TQ(config)#voice vlan priority 5
8.4 voice vlan oui
Description
The voice vlan oui command is used to create Voice VLAN OUI. To delete the
specified Voice VLAN OUI, please use no voice vlan oui command.
48