JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
snmp-server engineID { [local l
ocal-engineID
] [remote
remote-engineID
] }
no snmp-server engineID
Parameter
local
—— Local Engine ID for local clients. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the switch. Its
length ranges from 6 to 32 hexadecimal characters, which must be even
number meanwhile.
remote
—— Remote Engine ID for the switch. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the remote device
which receives informs from the switch. Its length ranges from 6 to 32
hexadecimal characters, which must be even number meanwhile.
Command Mode
Global Configuration Mode
Example
Specify the local engineID as 1234567890, and the remote engineID as
abcdef123456:
T3700G-52TQ(config)#snmp-server engineID local 1234567890 remote
abcdef123456
35.7 snmp-server traps
Description
The snmp-server traps command is used to enable SNMP extended traps.
To disable the sending of SNMP extended traps, please use no snmp-server
traps command.
Syntax
snmp-server traps [ cpu-threshold | fan | inventory | link-mode |
mac-lock-violation | memory-threshold | multi-users | pim | power |
spanning-tree | storm-control | temperature | vlan | vrrp ]
no snmp-server traps [ cpu-threshold | fan | inventory | link-mode |
mac-lock-violation | memory-threshold | multi-users | pim | power |
spanning-tree | storm-control | temperature | vlan | vrrp ]
296
To Next Page
Loading...
