JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
DHCP Configuration Mode
Example
Set the extend option code as 100, the extend option type as ip address, the
extend option value as 192.168.10.1 in the address pool “product”:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# option code 100 ip-address 192.168.10.1
38.3 extend-option capwap-ac-ip
Description
The extend-option capwap-ac-ip command is used to configure the IP
address of the remote DHCP server. To delete the remote DHCP server’s IP
address, please use no extend-option capwap-ac-ip command.
Syntax
extend-option capwap-ac-ip
ip-address
no extend-option capwap-ac-ip
Parameter
ip-address
—— Specify the IP address of the remote server.
Command Mode
DHCP Configuration Mode
Example
Set the remote DHCP server’s IP address as 192.168.3.1 in the address pool
“product”:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# extend-option capwap-ac-ip 192.168.3.1
38.4 extend-option vendor-class-id
Description
The extend-option vendor-class-id command is used to configure the class
ID of the packets from DHCP server in a different network segment. To delete
the class ID settings, please use no extend-option vendor-class-id
command.
329
To Next Page
Loading...
