JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Router Configuration Mode: In this mode, commands for configuring the Layer 3
functions are provided.
2. Some commands are global, that means they can be performed in all modes:
show: Displays all information of switch, for example: statistic information, port information,
VLAN information.
1.3 Security Levels
This switch’s security is divided into two levels: User level and Admin level.
User level only allows users to do some simple operations in User EXEC Mode; Admin level
allows you to monitor, configure and manage the switch in Privileged EXEC Mode, Global
Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode.
Users get the privilege to the User level once connecting console port with the switch or
logging in by Telnet/SSH. However, Guest users are restricted to access the CLI.
Users can enter Privileged EXEC mode from User EXEC mode by using the enable command. In
Global Configuration Mode, you can configure password for Admin level by enable password
command. Once password is configured, you are required to enter it to access Privileged EXEC
mode.
1.4 Conventions
1.4.1 Format Conventions
The following conventions are used in this Guide:
Items in square brackets [ ] are optional
Items in braces { } are required
Alternative items are grouped in braces and separated by vertical bars. For example:
speed {10 | 100 | 1000 | 10000 }
Bold indicates an unalterable keyword. For example: show logging
Normal Font indicates a constant (several options are enumerated and only one can be
selected). For example: switchport type { access | trunk | general }
Italic Font indicates a variable (an actual value must be assigned). For example: bridge
aging-time
aging-time
14
To Next Page
Loading...
