JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Display the directories and files in USB device:
T3700G-52TQ#show files-in-usb
22.32 show fiber-ports
Description
The show fiber-ports command is used to display the information of
optical transceiver module .
Syntax
show fiber-ports
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of optical transceiver module:
T3700G-52TQ#show fiber-ports
22.33 show image-info
Description
The show image-info command is used to display the information of image
files in the system.
Syntax
show image-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system image files’ information of the switch:
T3700G-52TQ#show image-info
158
To Next Page
Loading...
