TP-Link JetStream T3700G-52TQ - Show Multicast Mac-Address-Table

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
34.2 show multicast mac-address-table
Description
The show multicast mac-address-table command is used to display
Multicast Forwarding Database (MFDB) table information.
Syntax
show multicast mac-address-table [ igmpsnooping | mldsnooping | static |
stats ]
Parameter
igmpsnooping——Display IGMP Snooping entries in the MFDB table.
mldsnooping ——Display MLD Snooping entries in the MFDB table.
static ——Display Static entries in the MFDB table.
stats——Display MFDB statistics.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display IGMP Snooping entries in the MFDB table:
T3700G-52TQ(config)# show multicast mac-address-table igmpsnooping
289