JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
22.16 copy startup-config usb
Description
The copy startup-config usb command is used to upload the backup
configuration file to the USB stick.
Syntax
copy startup-config usb
usb:filename
Parameter
usb:filename
—— Specify the configuration file location in the format of
usb://filepath/filename.
Command Mode
Privileged EXEC Mode
Example
Save the startup configuration file of the switch to the USB stick and specify
the configuration file location as usb://building/l3:
T3700G-52TQ#copy startup-config usb usb://building/l3
22.17 copy tftp startup-config
Description
The copy tftp startup-config command is used to download the
configuration file from the TFTP server to the switch as the startup
configuration file.
Syntax
copy tftp startup-config ip-address
ip-addr
filename
name
Parameter
ip-addr
—— IP address of the TFTP server.
name
—— Specify the name of the configuration file which would be
downloaded. The configuration file with the name
name_unitid
.cfg will be
downloaded to the switch with corresponding unit ID in the stack.
149
To Next Page
Loading...
