TP-Link JetStream T3700G-52TQ - Snmp-Server Traps Ospf Lsa

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
virt-bad-packet ——Enable packet parse failure traps on virtual interfaces.
virt-config-error —— Enable config mismatch errors on virtual interfaces.
Command Mode
Global Configuration Mode
Example
Enable authentication-failure traps for the switch:
T3700G-52TQ(config)# snmp-server traps ospf errors
authentication-failure
35.10 snmp-server traps ospf lsa
Description
The snmp-server traps ospf lsa command is used to enable lsa related traps.
To disable the sending of lsa related traps, please use no snmp-server traps
ospf lsa command.
Syntax
snmp-server traps ospf lsa [ lsa-maxage | lsa-originate | all ]
no snmp-server traps ospf lsa [ lsa-maxage | lsa-originate | all ]
Parameter
lsa-maxage —— Enable lsa-maxage traps. It is sent when one of the LSAs in
the link-state database has aged to maxage.
lsa-originate ——Enable lsa- originate traps. It is sent when OSPF originates a
new LSA.
all —— Enable all the lsa related traps.
Command Mode
Global Configuration Mode
Example
Enable all the lsa related traps for the switch:
T3700G-52TQ(config)# snmp-server traps ospf lsa all
299