JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#mvr
33.3 mvr mode
Description
The mvr mode command is used to specify the MVR mode. To return to the
default configuration, please use no mvr mode command.
Syntax
mvr mode { compatible | dynamic }
no mvr mode
Parameter
compatible | dynamic——Specify the MVR mode.
Command Mode
Global Configuration Mode
Example
Specify the MVR mode type as dynamic:
T3700G-52TQ(config)#mvr mode dynamic
33.4 mvr vlan
Description
The mvr vlan command is used to set the MVR multicast VLAN. To return to
the default configuration, please use no mvr vlan command.
Syntax
mvr vlan
vlan-id
no mvr vlan
Parameter
vlan-id
—— VLAN ID, ranging from 1 to 4093.
Command Mode
Global Configuration Mode
Example
Set the MVR multicast VLAN as VLAN 2:
282
To Next Page
Loading...
