TP-Link JetStream T3700G-52TQ - Line Telnet; Login Authentication(Telnet)

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
48.14 line telnet
Description
The line telnet command is used to enter the Line Configuration Mode to
configure the telnet terminal line to which you want to apply the
authentication list.
Syntax
line telnet
Command Mode
Global Configuration Mode
Example
Enter the telnet terminal line configuration mode:
T3700G-52TQ(config)#line telnet
48.15 login authentication(telnet)
Description
The login authentication command is used to apply the login authentication
method list to the telnet terminal line.
Syntax
login authentication { method-list }
no login authentication
Parameter
method-list —— Specify the login method list on the telnet terminal line. It is
“networkList” by default, which contains the method “local”.
Command Mode
Line Configuration Mode
Example
Configure the login authentication method list on the telnet terminal line as
“defaultList”:
443