TP-Link JetStream T3700G-52TQ - Show Rmon Event; Show Rmon Alarm

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
35.28 show rmon event
Description
The show rmon event command is used to display the configuration of
SNMP-RMON Event.
Syntax
show rmon event [ index ]
Parameter
index —— The index number of the entry selected to display the
configuration, ranging from 1 to 12. By default, the configuration of all
SNMP-RMON enabled entries is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Event configuration of entry1:
T3700G-52TQ#show rmon event 1
35.29 show rmon alarm
Description
The show rmon alarm command is used to display the configuration of the
Alarm Management entry.
Syntax
show rmon alarm [ index ]
Parameter
index —— The index number of the entry selected to display the
configuration, ranging from 1 to 12. By default, the configuration of all Alarm
Management entries is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of the Alarm Management entry 1:
T3700G-52TQ#show rmon alarm 1
310