TP-Link JetStream T3700G-52TQ - Show Ip Vrrp

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
clear ip vrrp statistics
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Clear all the statistics about vrrp on the switch:
T3700G-52TQ(config)# clear ip vrrp statistics
44.11 show ip vrrp
Description
This command is used to display the basic configuration information of all the
virtual routers or a specified virtual router.
Syntax
show vrrp [ vrid vrid ][ interface {{ fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port | vlan vlan-id }]
Parameter
vrid —— The virtual router ID.
fastEthernet | gigabitEthernet | ten-gigabitEthernet
—— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the vrrp information of virtual router 4 on interface VLAN 3:
T3700G-52TQ(config)# show ip vrrp vrid 4 interface vlan 3
388