TP-Link JetStream T3700G-52TQ - Line

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
console is enabled. To return to the default configuration, please use no
media-type rj45 command.
Syntax
media-type rj45
no media-type rj45
Command Mode
Line Configuration Mode
Example
Enable the RJ-45 console input:
T3700G-52TQ(config)# line console 0
T3700G-52TQ(config-line)# media-type rj45
Receive the micro-USB console input prior to the RJ-45 console input:
T3700G-52TQ(config)# line console 0
T3700G-52TQ(config-line)# no media-type rj45
12.7 line
Description
The line command is used to enter the Line Configuration Mode and make
related configurations for the desired user(s), including the login mode and
password configurations.
Syntax
line [console linenum | ssh | telnet ]
Parameter
linenum —— The number of users allowed to login through console port. Its
value is 0 in general as there is only one console port on a switch.
Command Mode
Global Configuration Mode
Example
Enter the Console port configuration mode and configure the console port 0:
T3700G-52TQ(config)#line console 0
72