TP-Link JetStream T3700G-52TQ - Enable Authentication(Ssh); Show Aaa Global

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
48.19 enable authentication(ssh)
Description
The enable authentication command is used to apply the privilege
authentication method list to the ssh terminal line. To restore to the default
authentication method list, please use the no enable authentication
command.
Syntax
enable authentication { method-list }
no enable authentication
Parameter
method-list —— Specify the enable method list on the ssh terminal line. It is
“enableList” by default, which contains the priority 1 method “enable” and
priority 2 method “none”.
Command Mode
Line Configuration Mode
Example
Configure the enable authentication method list on the ssh terminal line as
“defaultList”:
T3700G-52TQ(config)# line ssh
T3700G-52TQ(config-line)# enable authentication defaultList
48.20 show aaa global
Description
This show aaa global command is used to display global status of AAA
function and the login/enable method lists of different application modules:
console, telnet, ssh and HTTP.
Syntax
show aaa global
446