JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Configure the DST period of the switch as USA:
T3700G-52TQ(config)#system-time dst predefined USA
22.4 system-time dst date
Description
The system-time dst date command is used to specify the DST
configuration in Date mode. This configuration is one-off in use. By default,
the current year is used as the starting time. DST time periods should be
within 12 months over one/two year.
Syntax
system-time dst date {
smonth
} {
sday
} {
stime
} {
syear
} {
emonth
} {
eday
} {
etime
}
{eyear}[
offset
]
Parameter
smonth
—— Month to start, with the options: Jan, Feb, Mar, Apr, May, Jun,
Jul, Aug, Sep, Oct, Nov, Dec
sday ——
Day to start, ranging from 1 to 31. Please mind that the number of
days depends on the month.
stime
—— Time to start, in the format of hh:mm.
syear ——
Year to start, ranging from 2000 to 2099.
emonth
—— Month to end, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
eday
—— Day to end, ranging from 1 to 31. Please mind that the number of
days depends on the month.
etime
—— Time to end, in the format of hh:mm.
eyear ——
Year to end, ranging from 2000 to 2099.
offset
—— Specify the time adding in minutes when Daylight Saving Time
comes. The value ranges from 1 to 1440 and the default value is 60 minutes.
It is optional.
Command Mode
Global Configuration Mode
141
To Next Page
Loading...
