TP-Link JetStream T3700G-52TQ - Show Ip Interface; Show Ip Interface Brief

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
37.10 show ip interface
Description
This show ip interface command is used to display the detailed information
of the specified Layer 3 interface.
Syntax
show ip interface { { fastEthernet | gigabitEthernet | ten-gigabitEthernet } port
| port-channel port-channel-id | loopback id | vlan vlan-id }
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
port-channel-id —— The ID of the port channel. Member ports in this port
channel should all be routed ports.
id —— The loopback interface ID.
vlan-id —— The VLAN interface ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the detailed information of the VLAN interface 2:
T3700G-52TQ(config)# show ip interface vlan 2
37.11 show ip interface brief
Description
This show ip interface brief command is used to display the summary
information of the Layer 3 interfaces.
Syntax
show ip interface brief
Command Mode
Privileged EXEC Mode and Any Configuration Mode
325