TP-Link JetStream T3700G-52TQ - Ip Pim (Interface); Ip Pim Ssm

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Enable PIM dense mode globally:
T3700G-52TQ(config)# ip pim dense-mode
42.3 ip pim (interface)
Description
The ip pim command is used to enable PIM on the specified interface. To
disable PIM on this interface, please use no ip pim command.
Syntax
ip pim
no ip pim
Command Mode
Interface Configuration Mode
Example
Enable PIM on VLAN interface 1:
T3700G-52TQ(config)# interface vlan 1
T3700G-52TQ(config-if)# ip pim
42.4 ip pim ssm
Description
The ip pim ssm command is used to enable PIM SSM function on the
specified group. To disable the PIM SSM function on this interface, please
use no ip pim ssm command.
Syntax
ip pim ssm default
no ip pim ssm default
ip pim ssm
group-address group-mask
no ip pim ssm group-address group-mask
367