JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
location
—— Device Location. It consists of 32 characters at most. It is
SHENZHEN by default.
Command Mode
Global Configuration Mode
Example
Configure the system location as GUANGZHOU:
T3700G-52TQ(config)#location GUANGZHOU
22.8 contact-info
Description
The contact-info command is used to configure the system contact
information. To clear the system contact information, please use no
contact-info command.
Syntax
contact-info
contact_info
no contact-info
Parameter
contact_info
—— Contact Information. It consists of 32 characters at most. It
is www.tp-link.com by default.
Command Mode
Global Configuration Mode
Example
Configure the system contact information as www.tp-link.com:
T3700G-52TQ(config)#contact
info www.tp-link.com
144
To Next Page
Loading...
