TP-Link JetStream T3700G-52TQ - Show Mvr Interface; Show Mvr Members

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
33.10 show mvr interface
Description
The show mvr interface command is used to display the port configuration
of MVR.
Syntax
show mvr interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet
port | port-channel port-channel-id ]
Parameter
port —— The port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of MVR for Gigabit Ethernet port 2:
T3700G-52TQ#show mvr interface gigabitEthernet 1/0/2
33.11 show mvr members
Description
The show mvr members command is used to display the MVR membership
groups allocated.
Syntax
show mvr members [ ip-addr ]
Parameter
ip-addr —— MVR group multicast IP address.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the members of the MVR group whose multicast IP address is
224.1.1.1:
T3700G-52TQ#show mvr members 224.1.1.1
286