TP-Link JetStream T3700G-52TQ - Mark Cos-As-Sec-Cos; Mirror

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
25.32 mark cos-as-sec-cos
Description
The mark cos-as-sec-cos command is used to mark outer VLAN tag priority
as the inner VLAN tag priority, that is to say, mark CoS value as secondary
CoS value.
Syntax
mark cos-as-sec-cos
Command Mode
Policy-Class-Map Configuration Mode
Example
Enter the Policy-Map Config mode for a policy named tp, then add a class
named market to the policy and enter Policy-Class-Map Configuration Mode.
Mark CoS value as secondary CoS value:
T3700G-52TQ(config)#policy-map tp
T3700G-52TQ(config-pmap)#class market
T3700G-52TQ(config-pmap-c)#mark cos-as-sec-cos
25.33 mirror
Description
The mirror command is used to forward copies of matching packets to the
specific port.
Syntax
mirror interface-num
Parameter
interface-num —— The interface number.
Command Mode
Policy-Class-Map Configuration Mode
Example
Enter the Policy-Map Config mode for a policy named tp, then add a class
named market to the policy and enter Policy-Class-Map Configuration Mode.
Forward copies of matching packets to port 1/0/3:
201