TP-Link JetStream T3700G-52TQ - Ip Dhcp Server Conflict-Logging

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
extend-option vendor-class-id class-id
no extend-option vendor-class-id
Parameter
class-id —— Specify the class ID of the DHCP packets from another network
segment.
Command Mode
DHCP Configuration Mode
Example
Set the class ID of the DHCP packets from another network segment as 34 in
the address pool “product”:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# extend-option vendor-class-id 34
38.5 ip dhcp server conflict-logging
Description
The ip dhcp server conflict-logging command is used to enable conflict
logging on DHCP server. To disable conflict logging on DHCP server, please
use no ip dhcp server conflict-logging command.
Syntax
ip dhcp server conflict-logging
no ip dhcp server conflict-logging
Command Mode
Global Configuration Mode
Example
Enable conflict logging on DHCP server:
T3700G-52TQ(config)# ip dhcp server conflict-logging
330