TP-Link JetStream T3700G-52TQ - Show Vlan Private-Vlan

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
primary-vlan-id —— Primary VLAN ID, ranging from 2 to 4093.
secondary-vlan-id —— Secondary VLAN ID, ranging from 2 to 4093.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Configure promiscuous type Gigabit Ethernet port 1/0/3 as a member of
primary VLAN 3 and secondary VLAN 4:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/3
T3700G-52TQ(config-if)#switchport private-vlan mapping 3 4
9.8 show vlan private-vlan
Description
The show vlan private-vlan command is used to display the Private VLAN
configuration information of the switch.
Syntax
show vlan private-vlan
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of all Private VLAN:
T3700G-52TQ(config)#show vlan private-vlan
55