TP-Link JetStream T3700G-52TQ - Show Spanning-Tree Interface-Security; Show Spanning-Tree Mst

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
30.25 show spanning-tree interface-security
Description
The show spanning-tree interface-security command is used to display the
protect information of all ports or a specified port.
Syntax
show spanning-tree interface-security [fastEthernet port | gigabitEthernet
port | ten-gigabitEthernet port ] [bpdufilter | bpduguard | loop | root | tc |
tc-defend]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the protect information of all ports:
T3700G-52TQ(config)#show spanning-tree interface-security
Display the protect information of Gigabit Ethernet port 1/0/1:
T3700G-52TQ(config)#show spanning-tree interface-security
gigabitEthernet 1/0/1
Display the interface security bpdufilter information:
T3700G-52TQ(config)# show spanning-tree interface-security bpdufilter
30.26 show spanning-tree mst
Description
The show spanning-tree mst command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst {configuration [digest] | instance instance-id
[interface [fastEthernet port | gigabitEthernet port | ten-gigabitEthernet
port ] ] }
Parameter
instance-id —— Instance ID desired to show, ranging from 1 to 8.
248