TP-Link JetStream T3700G-52TQ - Logging Monitor; Logging Monitor Level

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Global Configuration Mode
Example
Output the log information with severity levels between 0-7 to the console
port:
T3700G-52TQ(config)# logging console level 7
18.9 logging monitor
Description
The logging monitor command is used to display the system logs on the
terminal devices. To disable logging to the terminal, please use no logging
monitor command. This function is enabled by default.
Syntax
logging monitor
no logging monitor
Command Mode
Global Configuration Mode
Example
Disable logging to the terminal devices:
T3700G-52TQ(config)# no logging monitor
18.10 logging monitor level
Description
The logging monitor level command is used to limit messages logged to the
terminal devices. System logs no higher than the set threshold level will be
displayed on the terminal devices. To restore the threshold level to default
value, please use no logging monitor level command.
Syntax
logging monitor level level
no logging monitor level
110