JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
indicates sending trap messages to the management station, and “log-notify”
indicates logging the event and sending trap messages to the management
station.
owner-name
—— The owner of the event entry, ranging from 1 to 16
characters.
Command Mode
Global Configuration Mode
Example
Configure the community name of entry 1 as “community1”, the description
of the event as “description1”, the type of event as log and the owner of the
event as “owner1”:
T3700G-52TQ(config)#rmon event 1 community community1 description
description1 type log owner owner1
35.17 rmon alarm
Description
The rmon alarm command is used to configure SNMP-RMON Alarm
Management. To return to the default configuration, please use no rmon
alarm command. Alarm Group is one of the commonly used RMON Groups.
RMON alarm management allows monitoring the specific alarm variables.
When the value of a monitored variable exceeds the threshold, an alarm event
is generated, which triggers the switch to act in the set way.
Syntax
rmon alarm
index
{ stats-index
sindex
} [ alarm-variable { revbyte | revpkt |
bpkt | mpkt | crc-lign | undersize | oversize | jabber | collision | 64 | 65-127 |
128-255 | 256-511 | 512-1023 | 1024-10240 }] [ s-type { absolute | delta} ]
[ rising-threshold
r-hold
] [ rising-event-index
r-event
] [ falling-threshold
f-hold
] [ falling-event-index
f-event
] [ a-type {rise | fall | all} ] [ owner
owner-name
] [ interval
interval
]
no rmon alarm
index
Parameter
index
—— The index number of the Alarm entry, ranging from 1 to 20.
sindex
—— Specify the statistics index. It ranges from 1 to 480.
alarm-variable —— The alarm variable. By default, the option is revbyte.
304
To Next Page
Loading...
