TP-Link JetStream T3700G-52TQ - Show Ip Ospf Area Neighbor

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Display the detailed information of all the interfaces of Area 0 in process 1:
T3700G-52TQ# show ip ospf 1 area 0 interface
46.45 show ip ospf area neighbor
Description
The show ip ospf are neighbor command is used to display the neighbor
information of the specified area.
Syntax
show ip ospf process-id area area-id neighbor [ detail | interface-name
interface-number ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
detail—— The detailed information of the neighbor.
interface-name interface-number —— Specify the interface name and
number to display the detailed neighbor’s information on this interface.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the summary information of the neighbors of Area 0 in process1:
T3700G-52TQ# show ip ospf 1 area 0 neighbor
430