TP-Link JetStream T3700G-52TQ - Snmp-Server Traps Ospf Overflow; Snmp-Server Traps Ospf Retransmit

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
35.11 snmp-server traps ospf overflow
Description
The snmp-server traps ospf overflow command is used to enable overflow
traps. To disable the sending of overflow traps, please use no snmp-server
traps ospf overflow command.
Syntax
snmp-server traps ospf overflow [ all | lsdb-approaching-overflow |
lsdb-overflow ]
no snmp-server traps ospf overflow [ all | lsdb-approaching-overflow |
lsdb-overflow ]
Parameter
all —— Enable all the overflow traps.
lsdb-approaching-overflow —— Enable lsdb approaching overflow traps. It is
sent when the number of LSAs in the link-state database is approaching
overflow.
lsdb-overflow —— Enable lsdb overflow traps. It is sent when the number of
LSAs in the link-state database overflows.
Command Mode
Global Configuration Mode
Example
Enable all the overflow traps for the switch:
T3700G-52TQ(config)# snmp-server traps ospf overflow all
35.12 snmp-server traps ospf retransmit
Description
The snmp-server traps ospf retransmit command is used to enable
retransmit traps. To disable the sending of retransmit traps, please use no
snmp-server traps ospf retransmit command.
Syntax
snmp-server traps ospf retransmit [ all | packets | virt-packets ]
no snmp-server traps ospf retransmit [ all | packets | virt-packets ]
300