TP-Link JetStream T3700G-52TQ - Snmp-Server Traps Ospf All; Snmp-Server Traps Ospf Errors

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
35.8 snmp-server traps ospf all
Description
The snmp-server traps ospf all command is used to enable OSPF traps. To
disable the sending of OSPF traps, please use no snmp-server traps ospf all
command.
Syntax
snmp-server traps ospf all
no snmp-server traps ospf all
Command Mode
Global Configuration Mode
Example
Enable all the OSPF traps for the switch:
T3700G-52TQ(config)# snmp-server traps ospf all
35.9 snmp-server traps ospf errors
Description
The snmp-server traps ospf errors command is used to enable error traps.
To disable the sending of error traps, please use no snmp-server traps ospf
errors command.
Syntax
snmp-server traps ospf errors [ authentication-failure | bad-packet |
config-error | virt-authentication-failure | virt-bad-packet | virt-config-error ]
no snmp-server traps ospf errors [ authentication-failure | bad-packet |
config-error | virt-authentication-failure | virt-bad-packet | virt-config-error ]
Parameter
authentication-failure —— Enable authentication failure traps on non-virtual
interfaces.
bad-packet —— Enable packet parse failure traps on non-virtual interfaces.
config-error —— Enable config mismatch error traps on non-virtual
interfaces.
virt-authentication-failure ——Enable authentication failure traps on virtual
interfaces.
298