TP-Link JetStream T3700G-52TQ - Show Ipv6 Mld Snooping Interface; Show Ipv6 Mld Snooping Vlan

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ#show ipv6 mld snooping
32.22 show ipv6 mld snooping interface
Description
The show ipv6 mld snooping interface command is used to display the port
configuration of IGMP.
Syntax
show ipv6 mld snooping interface [ fastEthernet port | gigabitEthernet port
| ten-gigabitEthernet
port | port-channel port-channel-id ] basic-config
show ipv6 mld snooping interface [ fastEthernet
port-list | gigabitEthernet
port-list | ten-gigabitEthernet port –list ] basic-config
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the configuration
of all ports is displayed.
port-channel-id —— The ID of port channel.
basic-config —— The basic configuration information selected to display.
port-list —— The list group of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP basic configuration of Gigabit Ethernet port 2:
T3700G-52TQ#show ipv6 mld snooping interface gigabitEthernet 1/0/2
basic-config
Display the IGMP basic configuration of Gigabit Ethernet ports 2-4:
T3700G-52TQ#show ipv6 mld snooping interface gigabitEthernet 1/0/2-4
basic-config
32.23 show ipv6 mld snooping vlan
Description
The show ipv6 mld snooping vlan command is used to display the VLAN
configuration of IGMP.
277