JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Configure the connection password of virtual terminal connection 0-5 as
“tplink” and unencrypted:
T3700G-52TQ(config)#line vty 0 5
T3700G-52TQ(config-line)#password 0 tplink
12.9 login local
Description
The login local command is used to configure the login mode of the switch
which uses the user name and password to login.
Syntax
login local
Command Mode
Line Configuration Mode (Console)
Example
Configure the login of Console port connection 0 as login local mode:
T3700G-52TQ(config)#line console 0
T3700G-52TQ(config-line)#login local
12.10 telnet
Description
The telnet enable command is used to enable the Telnet function. To disable
the Telnet function, please use the telnet disable command. This function is
enabled by default.
Syntax
telnet enable
telnet disable
Command Mode
Global Configuration Mode
74
To Next Page
Loading...
