TP-Link JetStream T3700G-52TQ - Ip Dhcp Relay Information Circuit-ID; Ip Dhcp Relay Information Remote-ID

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
drop: Discard the packet with the Option 82 field.
keep: Keep the Option 82 field in the packet.
replace: Replace the option 82 field with the system option defined by the
switch.
Command Mode
Global Configuration Mode
Example
Specify the option 82 policy as replace to replace the Option 82 field with the
local parameter on receiving the DHCP request packet:
T3700G-52TQ(config)# ip dhcp relay information policy replace
39.5 ip dhcp relay information circuit-id
Description
The ip dhcp relay information circuit-id command is used to specify the
custom circuit ID when option 82 customization is enabled. To clear the
circuit ID, please use no ip dhcp relay information circuit-id command.
Syntax
ip dhcp relay information circuit-id circuitID
no ip dhcp relay information circuit-id
Parameter
circuitID —— Specify the circuit ID, ranging from 1 to 32 characters.
Command Mode
Global Configuration Mode
Example
Specify the circuit ID as “tplink”:
T3700G-52TQ(config)# ip dhcp relay information circuit-id tplink
39.6 ip dhcp relay information remote-id
Description
The ip dhcp relay information remote-id command is used to specify the
custom remote ID when option 82 customization is enabled. To clear the
remote ID, please use no ip dhcp relay information remote-id command.
347