JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
none
—— Configure the authentication mode as none.
Command Mode
Interface Configuration Mode
Example
Configure the RIP authentication mode of interface VLAN2 as simple, and
specify its key as 123:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip rip authentication-mode simple 123
45.14 show ip rip
Description
The show ip rip command is used to display the RIP configurations.
Syntax
show ip rip [ interface ]
Parameter
interface —— Display the RIP interface basic information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the RIP routing information:
T3700G-52TQ(config)# show ip rip
398
To Next Page
Loading...
