TP-Link JetStream T3700G-52TQ - Show Ip Pim Bsr-Router; Show Ip Pim Rp Mapping

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)# show ip pim neighbor
42.17 show ip pim bsr-router
Description
The show ip pim bsr-router command is used to display the candidate BSR
and RP information.
Syntax
show ip pim bsr-router
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the BSR and RP settings:
T3700G-52TQ(config)# show ip pim bsr-router
42.18 show ip pim rp mapping
Description
The show ip pim rp mapping command is used to display the RP information
of the specified multicast group.
Syntax
show ip pim rp mapping [ rp-address | candidate | static ]
Parameter
rp-address —— Specify the RP to be displayed.
candidate —— Displays all the candidate RPs’ information.
static —— Displays all the staic RPs’ information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the candidate RP information of all the multicast groups:
T3700G-52TQ(config)# show ip pim rp mapping candidate
376