TP-Link JetStream T3700G-52TQ - Show Gvrp Global; Show Gvrp Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface ten-gigabitEthernet / interface range
ten-gigabitEthernet)
Example
Set the GARP leaveall timer of Gigabit Ethernet port 1/0/6 as 2000
centiseconds and restore the join timer of it to the default value:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/6
T3700G-52TQ(config-if)#gvrp timer leaveall 2000
T3700G-52TQ(config-if)#no gvrp timer join
10.4 show gvrp global
Description
The show gvrp global command is used to display the global GVRP status.
Syntax
show gvrp global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global GVRP status:
T3700G-52TQ(config)#show gvrp global
10.5 show gvrp interface
Description
The show gvrp interface command is used to display the GVRP
configuration information of a specified Ethernet port or of all Ethernet ports.
Syntax
show gvrp interface [gigabitEthernet port | ten-gigabitEthernet port ]
59