TP-Link JetStream T3700G-52TQ - Show Protocol-Vlan Template; Show Protocol-Vlan Vlan

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet/ interface ten-gigabitEthernet / interface range
ten-gigabitEthernet)
Parameter
index —— Specify the protocol group ID.
Example
Add Gigabit Ethernet port 1/0/20 to protocol group 1:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/20
T3700G-52TQ(config-if)#protocol-vlan group 1
6.4 show protocol-vlan template
Description
The show protocol-vlan template command is used to display the
information of the Protocol-based VLAN templates.
Syntax
show protocol-vlan template
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the Protocol-based VLAN templates:
T3700G-52TQ(config)# show protocol-vlan template
6.5 show protocol-vlan vlan
Description
The show protocol-vlan vlan command is used to display the information
about Protocol-based VLAN entry.
Syntax
show protocol-vlan vlan
43